Schweitzer Engineering SEL-2032, Инструкция по эксплуатации

Страница: 231 / 354

8.15
Date Code 20120126 Instruction Manual SEL-2032 Communications Processor
Serial Port Communications and Commands
Command Set
*>> MODMAP 2:METER I <Enter>
Reg.#(Dec) Description Type Unit and Scale
100 Month int
101 Day int
102 Year int
103 Hours int
104 Minutes int
105 Seconds int
106 Milliseconds int
107 Day of Week (Sunday-0, Monday-1, ...)int
108 IA int A
109 IA int Degrees*10
110 IB int A
111 IB int Degrees*10
112 IC int A
113 IC int Degrees*10
114 IN int A
115 IN int Degrees*10
116 VA int kV*10
117 VA int Degrees*10
118 VB int kV*10
119 VB int Degrees*10
120 VC int kV*10
121 VC int Degrees*10
122 VS int kV*10
123 VS int Degrees*10
124 FREQ int Hz*10
125 FREQ int N/A
126 VBAT int V*10
127 VBAT int N/A
128 IAB(A) int A
129 IAB(A) int Degrees*10
130 IBC(A) int A
131 IBC(A) int Degrees*10
132 ICA(A) int A
133 ICA(A) int Degrees*10
134 VAB(V) int kV*10
135 VAB(V) int Degrees*10
136 VBC(V) int kV*10
137 VBC(V) int Degrees*10
138 VCA(V) int kV*10
139 VCA(V) int Degrees*10
140 PA(MW) int MW*10
141 QA(MVAR) int MVAR*10
142 PB(MW) int MW*10
143 QB(MVAR) int MVAR*10
144 PC(MW) int MW*10
145 QC(MVAR) int MVAR*10
146 P(MW) int MW*10
147 Q(MVAR) int MVAR*10
148 I0(A) int A
149 I0(A) int Degrees*10
150 I1(A) int A
151 I1(A) int Degrees*10
152 I2(A) int A
153 I2(A) int Degrees*10
154 V0(V) int kV*10
155 V0(V) int Degrees*10
156 V1(V) int kV*10
157 V1(V) int Degrees*10
158 V2(V) int kV*10
159 V2(V) int Degrees*10
*>>
Figure 8.23 MODMAP Command
PASSWORD
Use the PASSWORD command (Access Level 2) to inspect or change
existing passwords. To inspect passwords, type PAS <Enter> . The passwords
for Level 1 and Level 2 are displayed, as shown in Figure 8.24 .
*>> PASSWORD <Enter>
1:OTTER
2:TAIL
*>>
Figure 8.24 PASSWORD Command Password Display
The command PAS 1 is used to start the Level 1 password change sequence.
Similarly, the command PAS 2 starts the Level 2 password change sequence.
Courtesy of NationalSwitchgear.com