Schweitzer Engineering Laboratories SEL-2100, Инструкция по эксплуатации

Страница: 163 / 206

Date Code 20010529 Distributed Network Protocol 3.00 C-13
SEL-2100 Instruction Manual
SETTINGS SHEET–DNP PORT–SET P
Baud Rate (300–38400) SPEED =
DNP Address (0–65534) DNPADR =
Class for Binary Event Data (0–3) CLASSB =
Class for Counter Event Data (0–3) CLASSC =
Minutes for Request Interval (0–323767) TIMERQ =
Seconds to Select/Operate Time-Out (0.0–30.0 seconds) STIMEO =
Number of Data Link Retries (0–15) DRETRY =
Seconds to Data Link Timeout (0–5 seconds) DTIMEO =
Minimum Seconds from DCD to Tx (0.00–1.00 seconds) MINDLY =
Maximum Seconds from DCD to Tx (0.00–1.00 seconds) MAXDLY =
Settle Time from RTS ON to Tx (OFF, 0.00–30.00 seconds) PREDLY =
Settle Time from Tx to RTS OFF (0.00–30.00 seconds) PSTDLY =
Seconds to Event Message Confirm Time-Out (1–50 counts) ETIMEO =
Enable Unsolicited Reporting (Y, N) UNSOL =
Enable Unsolicited Reporting at Power-Up (Y, N) PUNSOL =
DNP Address of Report (0–65534) REPADR =
Number of Events to Transmit On (1–200) NUMEVE =
Seconds Until Oldest Event to Tx On (0.0–60.0 seconds) AGEEVE =