Schweigen Isodrive 3200, Руководство по установке

Страница: 18 / 28

Page 18
6. SteelFlex
™
Safety Duct
Assembling SteelFlex
™
Safety Duct
SteelFlex
™
safety duct must be secured to a 250mm mounting pipe.
1. Slide the steel ring clamp over the end
of the duct then insert the PVC riser
pipe into the duct end
Parts required:
1. SteelFlex
™
safety ducting
2. Steel ring clamp
3. 20mm self-drilling button head screws
4. 250mm PVC riser pipe
1 2
4 3
NOTE: Do not use duct tape to fasten the duct – the screws and hose clamp are adequate to secure the duct
to the riser pipe.
2. Secure duct to the riser pipe at regular
intervals with 4 x 20mm button head
screws
3. Slide the steel ring clamp back up and
tighten to secure the riser pipe and the
duct
x4