Page 5
3. General
This manual is for the installation of the motor systems use for bathroom and general extraction.
Motor Features
• Universal mounting all position with IPX4 degree of weather protection
• Patented anti water intrusion system.
• Acoustic dome with super quiet, long vane, backward curved centrifugal fan.
• Airflow is dependant on installation and the ducting used.
• Using a single 150mm flexi duct run you should attain 600m
3
/hr depending on the ducting installation.
• The use of a smaller 125 ducting would result in a loss of airflow.
• Simple installation: - Mounts onto a 100mm PVC pipe for ultimate strength and allows for easy
Dektite roof sealing.
• Industrial quality motor and fan made in Germany and rated at 40,000 hours.
• Motor is a high efficiency PSC type and rated at 62W.
•
WARRANTY 5 YEARS
return to manufacturer. Covers faulty manufacturing or components. It does not
cover normal wear and tear.
General Notes on Installation and Use
This fan unit is designed to be installed using 100mm PVC pipe as the initial connection duct to the fan module,
and is supplied with a 100mm PVC pipe to 150mm flexible duct bell-mouth adaptor.
This fan is suitable for connection to multiple duct runs with a minimum inlet area of 11,000 mm². Ducting runs
should be more than 2 metres away from the unit and no more the 4-5 metres (check with supplier if longer
duct length required). Flexible ducting must be extended sufficiently to present a smooth air passage with
bends of at least the radii of twice the diameter of the duct.
WARNING:
The BRW600 must not be ducted into a wall cavity or a ceiling space, where a build up of grease
can occur and become a potential fire risk.
NOTE:
Fan module and dual foil flexi-duct are acoustically matched. The use of semi-rigid or rigid ducting will
result in increased noise levels and void the warranty. See installation instruction notes ‘Why flexi-duct’.
Recommended Installation Distance
For the BRW600 motor system, a minimum of
2-3 metres
is recommended.
NOTE:
Installation closer than these distances will result in higher noise levels. Maximum duct length
4-5 metres. Check with supplier if longer length is required. Do not reduce the duct size at any time
and avoid sharp bends.
