GP
-
MMAK
-
CX
-
04A
2100/2300 Mounting Arm Kit Manual
AUG 2021
RL: 1A
2
Assemble Mounting Bracket
to Mounting Arm using bolts
and nuts supplied:
•
Align the anchor holes in
the heater bracket and the
mounting arm, and insert a
bolt
•
Finger tighten nut on to
bolt to allow rotation of the
heater bracket
•
Align the desired mounting
angle holes in the heater
bracket to the outermost
holes in the mounting arm
•
Insert second bolt and fin-
ger tighten ONLY nut to
bolt
•
Horizontal mount
•
30° Angle mount
IMPORTANT
•
Install heater to mount-
ing bracket
(4 studs /
nuts)
BEFORE
tightening
nuts on bolts to mounting
arm with wrench
Using pairs of holes in the
heater
bracket
allows heater orientation:
•
Horizontal
•
Angled at 30°
(MAXIMUM angle mount)
Anchor holes
(bracket pivot
point)
Studs at top of heater to mounting bracket
NOTE: MOUNT HEATER AT MAXIMUM 30° ANGLE
