Schwank calorSchwank D 15 U, Техническое руководство, Страница: 54 / 66

infraSchwank D / calorSchwank D shape U
54
Version
021
in
fra
D Form_U 16
/19
_INT
Techni
cal
sp
eci
fic
ati
on subje
ct to
ch
ange
14 Accessories
Ball guards
Ball protection grids acc.18032-3 for using heaters in
sport halls [grid 40x40mm].
Delivery scope
Mounting set complete for each type of heater
existing of:
infra/calorSchwank D shape U 15U 20U 30U 40U 50U 60U
Ball protection grid L=1443mm 1x
Ball protection grid L=1843mm 2x 2x 2x 2x 2x
Ball protection grid L=2203mm 1x
Ball protection grid L=2963mm 1x 1x 2x 3x 3x
Protection grid burner top 1x 1x 1x 1x 1x 1x
Front protection cover burner 1x 1x 1x 1x 1x 1x
Protection grid burner end side 1x 1x 1x 1x 1x 1x
End bracket with stud bolts M8 1x 1x 1x 1x 1x 1x
Holding bracket [1x infra D +1x calor D] 1x 1x 1x 1x 1x
Angled bracket with stud bolt M8 4x 4x 6x 8x 10x 12x
Clamp 6x 6x 8x 10x 12x 14x
Set fixing material 1x 1x 1x 1x 1x 1x
Article number
12670800 12674350 12670810 12670820 12670830 12674360
Tab. 11: Overview delivery scope ball guards
Assembling instruction
[ Description for heater infra/calorSchwank D 30 U,
other types similar]
1.
Mounting heater as described in chapter 9,
page 24-29].
Note the required sideways slope of the heater of
20mm in ball protection grid application [Fig. 48].
2. Fix end bracket at inner side of turnaround box,
open and close again 4 nuts M8 [Fig. 50]
3. Fix two angle brackets at each tube hanger
[screws M8 x 60, nuts] [Fig. 51]
Screw on angled brackets at the inner holes of
suspension bracket
NOTE 50-60kW: Screws to fixing suspension bracket
bars must be inserted from below.
4. Holding bracket put loose on the first reflector [view
from burner unit] and screw together with two
angle brackets [screws M8 x 60, nuts], holding
bracket remain axially movable
NOTE: Use the right holding bracket –
difference infraSchwank D or calorSchwank D
– both in the delivery scope [Fig. 52]!
5. At all junctions ball protection segment to the
angle brackets the grid edges must be cut
free to ensure a gap-free fitting of the ball
protection segments grid to the reflector.
6. Assembling segments ball protection grids
starts on the turnaround box [ last suspension
bracket for shape L ]. Put first segment ball
protection grid L=2963 mm from below on
end bracket and angle brackets of the next
suspension bracket – Put clamps on stud
bolts M8 and mount with self-locking nuts
Mount clamp loose on one stud bolt of angle
bracket for further assembling next
protection grid [Fig. 53].
7. Put next segment ball protection grid
L= 1843 mm from below on angle brackets
and mount clamp with self-locking nuts M8,
clamp and angle bracket connect two
segments ball protection grid to each other.
Mount clamp loose on one stud bolt of angle