Remark: Up to 16 lamps can be trained.
2. Unpairing light(s)
Press group all key “1-2” + red reset button for 3 seconds that you want the light(s) to unpair.
Remote control gets close to light about 10 cm
distance for touch link.
3. Group Selection
Press the group selection button to select the group(s) you want to control
4. ON/OFF
ON/OFF: Every single press turns all the lights in selected
group(s) ON or OFF gradually.
USER MANUAL ZHF02
REMOTE CONTROL
FOR THE LED LAMP SERIES
ZHF02
BDA_ZHF02_a
Congratulations and thank you for purchasing the Schwaiger ZHF02 product. Below
you will find useful operating guidelines.
REMOTE CONTROL & CONNECTED BULB
5.Dimming
Dimming:
Dim the light(s) in selected group(s).
UP/DOWN button
Every press: dims the lumen step by step until
max./min.
Keep pressing: dims until max./min. in one time.
Remark:
There are totally 13 brighness diming level
Reset Button
Switch between dimming
function and color
temperature
RGB +
RGB –
Group 2
Group 1
ON-OFF
Brightness /
Color Temperature –
Brightness / Color
Tempe
All groups
Bulb(s) could be restored to factory default status either by remote or by wall switch. Factory
default by remote is same as un -pairing Bulb(s), while by wall switch is as following.
Technical data:
Frequency band: 2405-2480 MHz (ZigBee), Transmission power: < 7 mW
Disposal
Do not dispose of batteries or electric and electronic devices in the normal household
waste. The consumer is legally obliged to return electrical and electronic devices and
batteries that are at the end of their useful life to the point of sale or public collection
points that have been set up for this purpose. Legislation in the country of use governs
individual details regarding disposal. The symbol on the product, the user guide or the packaging
indicates this legal requirement.
Simplified declaration of conformity as per the RED Directive
Schwaiger GmbH hereby declares that the described radio system product complies with Direc-
tive 2014/53/EU and other directives applicable to the product. The complete EU declaration of
conformity is available online at: http://konform.schwaiger.de
1. Commissioning (Pairing) Light(s)
Commissioning (Pairing) Light(s): Follow instruction below to commission new smart light(s). In
case you buy new smart light(s) or the current smart light(s) are set to Factory Default.
ON
OFF
Light(s) blinks twice,
Once commissioned to
a remote, it’s no longer
visible to other remotes
Light(s) (Factory
Default) must start On
With your
Remote
Restarted by wall switch
Successfully
paired
to Remote
Fail
Press and hold the
button of the group
to which you want
to add the light(s)
for 3 seconds until
the status indicator starts to blink.
Please make sure that during this
process, the remote is close to the
light (distance of about 10 cm).
In case of a time-out,
the light(s) will turn
off the radio and
become a standard
non-controllable
light(s)
Group 2
Group 1
All Groups
ON
OFF
5x
10s
10s
2s
2s
2s
2s
2s
2s
1s
1s
1s
1s
1s
1s
on 1 second
off 2 seconds
on 1 second
off 2 seconds
on 1 second
off 2 seconds
on 1 second
off 2 seconds
on second
off 2 seconds
on
Starting
from
wall
switch
OFF
Light(s)
finishes
On
Factory
Default
Restarted by wall switch
Blinks
twice
User connects
light(s) to new
network(remote)
Or after
5 min
User flips the wall
switch off and
on 5x over
with 1-2 seconds
in between
Bulb is
added to
device list as
new device
ON
OFF
1x
Network is
closed
Status Indicator:
Remote is in Standby mode
or Selected Group is OFF
Selected Group is ON
Finding Network Channel
(slow) (when batteries are inserted)
Commisioning a bulb
(fast)
Dim up
Quick toggling between
highest and lowest
dimming level &
toggling CCT
Dim down
CCT button
Short press: adjusts the CCT step by step until max./min
Long pressing: adjusts the CCT until max./min. in one time
6.Reset remote control to factory default
Press “ON/OFF” key + red reset button for 3 seconds. The remote control will be reset to factory
default.
RESETTING BULB(S) OF THE HAL SERIES
Restored to factory default by switch
MANUFACTURER INFORMATION
Dear Customer,
should you require technical advice
and your retailer could not help
please contact our technical support.
Schwaiger GmbH
Würzburger Straße 17
90579 Langenzenn
Hotline: +49 (0) 9101 702-199
www.schwaiger.de
