30
First step
Switch on your TV set. Please make sure that your TV
set has been adjusted to the receiver. In case of a Scart
connection, the TV set must be set to the correct AV
channel.
Second step
Switch on the receiver. Please ensure that the receiver
has been preset for the most common satellites and their
channels and that you just have to enter the channel
locations via the numeric keys of the remote control of
the receiver.
Example:
If you wish to receive the satellite ASTRA1 19.2° E, you
must set your receiver to channel location 1 for directing
the antenna. The same applies also for other satellites,
such as Hotbird. If you wish to direct your antenna to
Hotbird, just call a preset channel of Hotbird with your
receiver.
Third step:
Now, direct your antenna to the satellite you selected.
You have several options to do so. The easiest and most
cost-effective solution is the following way:
Stand behind the antenna and move the antenna
completely into vertical position (see picture B). Make
sure that the receiving component of the antenna is
directed towards the south (see picture A).
Содержание DSR 6050 HD
