Schwaiger DAB 300, Руководство пользователя

Страница: 27 / 36

27
USER MANUAL DAB 300
1. Connect an audio cable between the audio output of the external device, such as an MP3
player, or smartphone with the AUX-IN jack.
2. Press the STANDBY button on the remote control or MENU on the device to turn on the
Digital Radio.
3. For the playback, press the function key on the device until the AUX-IN mode is shown on
the display, or press AUX-IN on the remote control.
4. Then start the playback on the connected device.
The control of the play through the external device, the volume can be controlled in
addition also on the radio.
5. Turn off both devices before you disconnect them.
Using Headphones
Warning! Hearing of too loud music via earbuds or headphones produces
excessive sound pressure and can lead to loss of hearing. Prevent
hearing damage by hearing of music at normal level.
1. Turn down the volume via the rotary control or by pressing to the lowest volume level.
2. Plug the earphones into the headphone jack of the device. The speakers are now muted,
and the sound will be played via the headset.
3. Then set the desired volume.
7. DIGITAL RADIO
7.1 DAB stations: search & store
Automatic channel search
The DAB radio stations will be searched the first time you power up the device or automatically
after a power failure. In the case of changes of the stations or if the Digital Radio is moved to
another site, it is the best you should start a new transmitter search.
1. Select the DAB-mode with the DAB button.
2. Press briefly SCAN. „Scanning“ appears in the display during the search.
At the end of the scan of the first listed channel is played.
Manual channel search
Usually the stations must not be searched manually, since all usable channels are found already
in the automatic search.
1. Press MENU. „Station scan“ appears on the display.
2. Press SELECT.
3. Scroll down in the menu with until „ Manual tune“ appears.
4. Press SELECT.
5. Scroll with , until the desired Multiplex-Block appears.