Schwaiger AVS5010 011, Руководство пользователя

Страница: 10 / 18

■
How To Transmit RCA from Your Satellite Receiver
You can transmit audio/video either directly from your satellite receiver, or by
connecting them to your VCR. To transmit directly from your satellite receiver,
follow the instructions below.
1. Connect satellite receiver and transmitter using one of the provided A/V
CABLE with RCA plug, plug SCART to any SCART jack of satellite receiver,
RCA to transmitter. Please follow the instruction figure below.
2.
Plug one end of the power adapter into the back of the transmitter and the
other end into any 230-volt wall outlet, Use only the adapter provided.
3.
If your satellite receiver or laser disc player has only one set of A/V output
jacks, in this case, please connect 75ohm RF coaxial cable from satellite
receiver's modulator output port to TV RF input terminal.
4.
.Locate and orient the transmitter according to the section of this manual titled
"Orienting Units for Optimum Performance" for best performance of transmitter.
9
28
■
How To Receive Wireless Audio/Video Signals on Your TV
There are two ways to receiver wireless audio/video signals on your remote
TV (TV in another location such as in bedroom, kitchen).
· Connect the receiver directly to the remote TV.
·
Connect the receiver to a VCR, which is then connected to the TV.
If your TV has picture-in-picture capabilities, you can view any image
transmitted by sender, such as your sleeping baby, in a small inset picture while
enjoying other programming on the rest of the screen. Consult the owner's
manual of your TV for instructions on using these capabilities.
Connecting Receiver Directly to Remote TV
Connect TV and receiver using the provided “RCA TO SCART A/V CABLE”
with RCA plug, plug SCART TO TV, RCA to receiver. Please follow the
instruction figure below.
29