Configuring the HomePlug network 9
AV 200
3
Configuring the HomePlug network
To set up custom encryption for your network using the encryption button.
3.1
Encrypting the HomePlug network at the touch of
a button
To encrypt a Homeplug network simply press the encryption button that is
located on the device. Pressing this button will encrypt your network with a
randomly generated password.
Adapters cannot be configured while in Standby mode.
The following section contains exact instructions on the basis of possible net-
work scenarios:
Encrypting a new AV 200 network consisting of two AV 200 adapters
If the adapters are still in their factory default states, press the encryption but-
tons on both adapters for
at least ten seconds
, until the Power LED goes
out and starts to flash.
Содержание AV 200
Страница 1: ...AV 200 ...