3
Solid w ire assembly w ith the co ver
1)
IDC contacts must be clean and not twisted.
The contacts are not rewireable.
2)
Place three solid wires (according to
) on the IDC contacts L, N and PE
3)
Place the appropriate cover on the outlet.
Ensure the cover is in the right position.
4)
Use the cover to press the wire down into the
IDC contacts. The cover must snap-in with the
body.
3
Solid w ire assembly w ith the co ver
1)
IDC contacts must be clean and not twisted.
The contacts are not rewireable.
2)
Place three solid wires (according to
) on the IDC contacts L, N and PE
3)
Place the appropriate cover on the outlet.
Ensure the cover is in the right position.
4)
Use the cover to press the wire down into the
IDC contacts. The cover must snap-in with the
body.
owner
vettersa
creation date
17.08.2018
release date
17.08.2018
released by
vettersa
change order no
2016073
rev
B
page
2 of 7
D10-015-719
Product Documentation
Mounting Instruction 4710-5
