Assembly
22
05.00 | WSG 25 | Assembly and Operating Manual | en | 389684
5 Assembly
5.1 Safety notes
DANGER
Risk of fatal injury due to electric current!
Touching live parts poses an immediate risk of fatal injury by
electrocution.
•
Only allow a qualified electrician to perform work on electrical
components.
•
Prior to commencing work on electric components, restore to
a de-energized state.
•
In case of damage to the insulation, switch off the power
supply immediately and arrange for a repair.
•
Keep humidity away from live parts.
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Make sure, that no residual energy remains in the system.
WARNING
Risk of burns through contact with hot surfaces!
Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.
•
For all work in the vicinity of hot surfaces, wear safety gloves.
•
Before carrying out any work, make sure that all surfaces have
cooled down to the ambient temperature.
