Technical data
20
05.00 | WSG 25 | Assembly and Operating Manual | en | 389684
Commands are sent to the product via TCP/IP connections, using
the TCP or UDP protocol. For further information, please see the
"WSG Command Set Reference Manual" (on the accompanying CD
or can be called up via the web interface).
The product currently also supports the following network
services:
– DHCP (dynamic IP addresses),
– SNTP (network time),
– HTTP (web user interface) and
– DNS (resolution of host names).
Interface specification:
Parameter
Value
Note
Transmission standard
IEEE 802.3
Communication standard
TCP/IP (IPv4)
Transmission speed [MBit/s]
10; 100
Auto-Negotiated
Transmission type
Half duplex
Auto-MDIX
yes
3.5 Name plate
The name plate is on the narrow side of the product above the
connector. It shows the type and the serial number of the product.
