23 – en
2.7 Notes on safe operation
• The product must not be clamped without a tool.
• Only use SCHUNK intermediate sleeves and always insert up to the
fixed backstop point.
• All repair work must be performed by the SCHUNK.
• Long, projecting or heavy tools may only be clamped if the speed of rotation is
reduced according to the ambient and operating conditions on site. The level of
reduction is the responsibility of the operator and must ensure safe operation of
the product.
• Never combine multiple product extensions.
• The operational safety and function of the product must not be impaired by
external influences.
• Do not remove the bleed screw locking device (pin or resin).
• Maintain and care for the product on a regular basis.
• Follow the country-specific applicable safety, accident prevention, and
environmental protection regulations for the application field of the product.
• Use mechanical screwdrivers only after approval by SCHUNK.