Assembly
05.00|0489065 KSH plus, KSH-LH plus, KSH-F plus |en
21
Connecting the clamping block
The clamping force block has four hydraulic connections:
I, II, III,
IV
.
Two connections for OPEN (
I
and
III
) and two connections for
CLOSE (
II
and
IV
).
Which of the two hydraulic connections has to be opened for
actuation depends on the specific application:
• Connection
I
and
II
for operation with external hydraulic pipes
or hose lines.
The thread for the hydraulic fitting – on the front of the
housing (item 1) –
is G⅛" for all clamping force blocks.
• Connection
III
and
IV
in the base for hose-free direct
connection in the machine table.
The threads for hose-free, direct connection are not designed for
hydraulic screw fittings.
NOTE:
All four hydraulic connections come sealed on delivery of the
clamping force block. The connections on the base are sealed with
set-screws (item 23) and those on the front with locking screws for
hydraulics (item 11).
