SCHUNK STM 48V, Сборка и руководство по эксплуатации

Страница: 14 / 80

Basic safety notes
14 05/STM-48V/en/2011-04-01/CW
2.6 Notes on particular risks
Risk of injury from objects falling and being ejected!

Provide protective equipment to prevent objects from falling or
being ejected, such as processed workpieces, tools, chips,
fragments, rejects.

Adapt the operating conditions, e.g. reduce the cycle time.
Risk of injury when the machine/system moves
unexpectedly!

Do not move parts by hand when the energy supply is
connected.

Do not reach into the open mechanism or the movement area
of the module.

Remove the energy supplies before installation, modification,
maintenance, or adjustment work.

Perform maintenance, modifications, and additions outside
the danger zone.

For all work, secure the module against accidental operation.
Risk of injury due to moving parts if these are controlled
incorrectly!
Possible causes for control errors:
•
Incorrect cabling or wiring
•
Removal of safety devices
•
Software errors
•
Sensor and signal transmitter errors
•
Entry of incorrect parameters prior to start-up
•
Defective module