manualshive.com logo in svg

SCHUNK SPK 140, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SPK 140 Скачать руководство пользователя страница 7

Basic safety instructions

2.2 Not intended use

The jaw box is not being used as intended if, for example:
• It is used as a press, a punch, a toolholder, a load-handling

device or as lifting equipment.

• It is used in working environments that are not permissible.
• Workpieces are not clamped properly, paying particular

attention to the clamping forces specified by the manufacturer.

• People work on machines or technical equipment that do not

comply with the EC Machinery Directive 2006/42/EC,
disregarding the applicable safety regulations.

• The technical data specified by the manufacturer for using the

jaw box are exceeded.

• The jaw box is used with machines/systems or workpieces that

are not designed to be used with it.

2.3 Notes on particular risks

This product may pose a danger to persons and property if, 
for example:
• It is not used as intended;
• It is not installed or maintained properly;
• The safety and installation instructions, local applicable safety

and accident prevention regulations or the EC Machinery
Directive are not observed.

 DANGER

Possible risk of fatal injury to operating personnel if a jaw
breaks or if the jaw box fails because the technical data have
been exceeded and a workpiece is released or parts fly off!

•

The technical data specified by the manufacturer for using the
jaw box must never be exceeded.

•

The jaw box may only be used on machines and facilities that
fulfill the minimum requirements of the EC Machinery
Directive 2006/42/EC; specifically, they must have effective
technical measures to protect against possible mechanical
hazards.

7

04.00 | | Jaw boxes SPK | en | 0889015

Содержание SPK 140









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды