Basic safety notes
02.00|SDV-P |en
5
Basic safety notes
Intended use
The pressure maintenance valve was designed for installation in a
machine to temporarily prevent the venting of the pneumatic con-
sumer through the valve at a pressure failure of the supply line.
Thus, a temporary force- or position maintenance can be realized
at different actuators. Especially suited fo grippers, which can not
be equipped with a mechanical gripping force maintenance.
The product is intended for installation in a machine/system. The
requirements of the applicable guidelines must be observed and
complied with.
The product may be used only in the context of its defined applica-
tion parameters
The product is designed for industrial use.
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
Ambient conditions and operating conditions
• Make sure that the product has a sufficient size for the application.
• Make sure that the environment is free from splash water and
vapors as well as from abrasion or processing dust. Exceptions
are products that are designed especially for contaminated en-
vironments.
2
2.1
2.2
www.comoso.com