SCHUNK RC 1212, Сборка и руководство по эксплуатации

Страница: 16 / 48

Assembly and settings
16 01.01|RP / RW / RC 1212-2128|en
Assembly and settings
NOTICE
Assembly measures
• When mounting loads, do not allow impermissible forces and
moments to be exerted (see catalog data).
• Select the suitable screw tightening torque when assembling
the module or loads at the module in accordance with the
generally accepted guidelines for screw connections.
• Secure all screws using a suitable chemical screw lock.
Mechanical connection
The values relate to the entire bolting surface.
Requirements for levelness of the bolting surface (Dimensions in mm)
Diameter Permissible unevenness
< 100 < 0.02
> 100 < 0.05
RP/W/C ... Gripper rotary modules are fastened at the side on the
base body.
Furthermore, connection geometries for the top jaws can be found
on the base jaws.
Dimensions for the position and size of the connection geometries,
☞
Catalog data sheet.
1 Mount the module using the fixing bores provided.
2 Mount the modules using the fixing bores provided.
3 Attach the top jaws using the mounting bores provided.
8
8.1
Check the evenness
of the bolting surface
Mounting
www.comoso.com