Basic safety instructions
8
03.00|Quick-Change Jaw System |en
DANGER
Possible risk of fatal injury to operating personnel from clothing
or hair being caught on the lathe chuck and being dragged into
the machine
Loose clothing or long hair may become caught on projecting
parts of the lathe chuck and be drawn into the machine.
• The machines and equipment must fulfill the minimum re-
quirements of the EC Machinery Directive; specifically, they
must have effective technical measures to protect against po-
tential mechanical hazards.
• Always wear tight-fitting clothing and a hairnet when working
on the machine and the lathe chuck.
DANGER
Possible risk of fatal injury to operating personnel if the chuck's
top speed is exceeded and a workpiece is released or parts fly
off!
• If the machine tool or technical equipment can reach a higher
speed than the chuck's top speed, a reliable speed limiter
must be installed and proof must be provided that the speed
limiter is effective.
CAUTION
There is a risk of injury from dropping the chuck jaws during
transport, installation or removal.
• Take special care in the danger zone when transporting,
installing or removing the chuck jaws.
CAUTION
Risk of injury due to interchangeable insert falling out,
particularly when used vertically.
If the interchangeable insert is placed on the supporting jaw
incorrectly and the retaining screw is not tightened, the inter-
changeable insert may fall out or be ejected.
• Push the interchangeable insert completely onto the
supporting jaw and lock it with the locking screw.
Содержание PRONTO
Страница 16: ......
