Design and description
18
02.00 | PLG | Assembly and Operating Manual | en | 1517334
Positions for the
individually
configurable options
Page 1: Name plate with product designation
Page 2: SCHUNK name plate
4.2 Description
Pneumatic 2-finger parallel gripper with long jaw stroke, high
gripping force and profiled rail guide for the use of long gripper
fingers
By pressure actuation of the opposite piston, the base jaws are
guided by a carrier on the piston, and are set in motion. The
synchronization of the jaw stroke is done with a rack and pinion
principle.
Synchronous variant: Both base jaws are controlled together and
synchronized via rack-and-pinion kinematics.
Asynchronous variant: Both base jaws can be controlled
independently and separately from each other.
Without synchronization: Enables the two base jaws to be
controlled together, whereby the movement of these is not
synchronized.
