Basic safety notes
01.00|1344367_NST3 |en
9
Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
•
Use only original spare parts or spares authorized by SCHUNK.
Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
•
Make sure that the product is used only in the context of its
defined application parameters,
•
Make sure that the product is a sufficient size for the
application.
•
Make sure that the contact surfaces of the interface are always
clean.
•
Make absolutely sure that no chips of any kind can enter the
interface and that the interface fills with cooling emulsion,
which is particularly possible with a horizontal design of the
clamping station. The best way to ensure both of these
requirements is to use the SDE protection covers. If the
interface should fill with cooling emulsion, initiate the
unlocking process and allow the interface to dry out in an
actuated state or carefully blow out with compressed air using
suitable protective equipment.
•
Only use high-quality cooling emulsions with anti-corrosive
additives during processing.
Personnel qualification
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
•
All work may only be performed by qualified personnel.
•
Before working with the product, the personnel must have read
and understood the complete assembly and operating manual.
•
Observe the national safety regulations and rules and general
safety instructions.
2.4
2.5
2.6
