Basic safety notes
12
01.00|1344367_NST3 |en
Malfunctions
Behavior in case of malfunctions
•
Immediately remove the product from operation and report
the malfunction to the responsible departments/persons.
•
Order appropriately trained personnel to rectify the
malfunction.
•
Do not recommission the product until the malfunction has
been rectified.
•
Test the product after a malfunction to establish whether it still
functions properly and no increased risks have arisen.
Disposal
Handling of disposal
Incorrect handling of disposal can make the product unsafe and
risks serious injuries and considerable material and environmental
harm.
After decommissioning, place the clamping station in a position
that enables any liquids to drain out.
•
Collect the escaping liquids and dispose of them properly in line
with the statutory provisions.
•
Follow local regulations on dispatching product components for
recycling or orderly disposal.
•
Dispose of the clamping station's metal parts as scrap metal.
Alternatively, you can return it to SCHUNK for proper disposal.
Fundamental dangers
General
•
Observe safety distances.
•
Never deactivate safety devices.
•
Before commissioning the product, take appropriate protective
measures to secure the danger zone.
•
Disconnect power sources before installation, modification,
maintenance, or calibration. Ensure that no residual energy
remains in the system.
•
If the energy supply is connected, do not move any parts by
hand.
•
Do not reach into the open mechanism or movement area of
the product during operation.
2.10
2.11
2.12
