Assembly
15.00 | KGG 60-20 ... 140-60 | Assembly and Operating Manual | en | 389166
17
5.2 Connections
5.2.1 Mechanical connection
WARNING
Risk of injury when the machine/system moves unexpectedly!
Switch off power supply.
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Mounting
The product can be mounted from the front, from the rear or on
the side.
Y
X
Position of centering sleeves
The centering elements required for fastening the grippers are
included in the scope of delivery.
Dimensions of centering elements (included in accessory pack)
Mounting KGG
60
70
80
100
140
Centering sleeves
Ø 5 H7 x
2.4 mm
Ø 5 H7 x
2.4 mm
Ø 6 H7 x
2.9 mm
Ø 8 H7 x
2.9 mm
Ø 8 H7 x
2.9 mm
