SCHUNK GSW-B Series, Сборка и руководство по эксплуатации

Страница: 19 / 36

Assembly
4.2 Pressure supply
CAUTION
Observe the requirements for the air supply
Technical data [ } 16].
• Pressure supply with compressed air or machine coolant is
carried out by the machine spindle.
• If compressed air is used:
– On machines without check valve: Use screw plug (150).
– On machines with check valve: Replace screw plug (150) by
throttle (151).
• If machine coolant is used:
– The screw plug (150) must be replaced by the throttle (151).
• Only open the required compressed air connections to the
GSW-B and at the SCHUNK gripper. For hose-free direct
connection, please use the O-ring from the enclosed accessory
kit of the SCHUNK gripper.
• Screw-fit connectors (152) are only used if a SCHUNK TCU
compensation unit is assembled at the same time. The screw-fit
connector is not included in the scope of delivery.
19 05.00 | GSW-B | Assembly and Operating Manual | en | 389112