SCHUNK FDB-AC 90, Сборка и руководство по эксплуатации

Страница: 35 / 44

Maintenance
02.00 | FDB-AC | Assembly and Operating Manual | en | 389513
35
CAUTION
The FDB-AC should not be operated for extensive periods of
time with the cutting tip pointing up. This orientation will
increase the amount of debris entering the cylinder and cause
premature wear of the cylinder and piston, possibly preventing
the piston from floating altogether.
The burr must be replaced at regular intervals. During initial
production, the burr and the workpiece should be examined often
in order to determine at what interval the burr should be replaced
Replacement of Burrs [
}
37].
At regular intervals (normally once every two years, or more often
depending on the application), an overhaul of the FDB-AC should
be performed in order to fully comply with the technical
specifications. Parts inside the FDB-AC, such as the blades in the
air-vane motor and bearings should be replaced as part of the
overhaul
Overhaul [
}
38].
At regular intervals, the pneumatics used to control the FDB-AC
should also be checked, especially the air-filter and lubricator.
Remember to fill the lubricator with oil.