Assembly and Operating Manual
Electrical Feed-Through for SRU Type EDF
3
Print date 01.07.2010
1. Safety
1.1. Symbol key
You will find this symbol wherever
hazards for persons
or
damage to the product
are possible.
This symbol indicates
important information
on the product or its handling.
1.2. Appropriate use
The unit must only be used within the scope of its technical data. Appropriate use also includes
compliance with the conditions the manufacturer has specified for commissioning, assembly,
operation, the environment and maintenance. Using the unit with disregard to even a minor
specification will be deemed inappropriate use. The manufacturer assumes no liability for any
injury or damage resulting from inappropriate use.
1.3.
Safety notes
There are potential risks associated with the unit, for example if:
the unit is improperly used, installed or serviced.
the unit is used other than for the intended purpose.
the EC Machine Directive, the accident prevention regulations, the VDE guidelines or the
safety and installation instructions are not observed.
-
All personnel who are responsible for installation, commissioning and servicing must have
read and understood the entire operating manual, in particular the chapter on »Safety«. It is
recommended to have this confirmed in writing.
Installation and dismantling, mounting of the proximity switches, connections and
commissioning may be carried out only by authorized personnel.
Work procedures that impair the correct functioning and operational safety of the product
are prohibited.
Do not move any parts by hand when the unit is connected to the power supply.
Do not reach into the open mechanical parts and the area of motion of the rotary unit.
The power supply cables must be removed for assembly, modification, maintenance and
adjustment of the unit.
Carry out all maintenance, modifications or attachments outside of the danger zone.
During installation, connection, adjusting, commissioning and testing, measures must be
taken to prevent the risk of inadvertent activation of the unit by the fitter or other persons.
