Assembly and Settings
22
03.00 | CLM | Assembly and operating manual | en | 389015
Stroke adjustment/
sensor adjustment
Ø
Loosen the attachment screw.
Ø
Set shock absorber stop LMST and proximity switch IN to
desired stroke.
Ø
Tighten the attachment screw.
✓
Observe the tightening torque, see following table.
Size
Max. permissible screw
tightening torque for strength class 8.8 [Nm]
CLM 50
• 1.3 – Shock absorber stop LMST-50-KT
• 0.3 – Proximity switch IN 40
CLM 100
3.0
CLM 200
5.9
The maximum permissible values for end position adjustment can
be found in the catalog.
Damping adjustment
To adapt the damping characteristic of the apparent kinetic
energy, the damper stroke and thus the characterteristics can be
adjusted.
Ø
Release the lock of the setscrew.
Ø
Adjust the damping adjustment setscrew to the desired
dimension.
IMPORTANT! Observe adjustment range Z!
Ø
Secure the setscrew again.
Size
Damping adjustment range Z [mm]
CLM 50
0...+1.8
CLM 100
-0.6...+2.4
CLM 200
-1.8...+1.8
