SCHUNK APS-ME1 Скачать руководство пользователя страница 4

General

4

01.00 | APS-ME1 | Assembly and Operating Manual | en | 1415570

1 General

1.1 About this manual

This manual contains important information for a safe and
appropriate use of the product.
This manual is an integral part of the product and must be kept
accessible for the personnel at all times.
Before starting work, the personnel must have read and
understood this operating manual. Prerequisite for safe working is
the observance of all safety instructions in this manual.

1.1.1 Applicable documents

• General terms of business
• Catalog data sheet of the purchased product
• Assembly and Operating Manual of the sensors
The documents listed here, can be downloaded on our homepage

www.schunk.com

1.2 Scope of delivery

The scope of delivery includes
• Electronic processor  APS-M1E
• Accessory pack

1.3 Warranty

If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the applicable documents, 

Applicable

documents

 [

}

 4]

• Observe the ambient conditions and operating conditions,

Environmental and operating conditions

 [

}

 5]

Содержание APS-ME1













Отзывы: