Schumacher 00-99-000990-0809, Руководство пользователя

Страница: 8 / 37

•
4
•
CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER™ 4.
IMPORTANT: CHARGE IMMEDIATELY AFTER PURCHASE, AFTER
EACH USE AND EVERY 30 DAYS TO KEEP THE INSTANT POWER™
INTERNAL BATTERY FULLY CHARGED.
LED Indicators:
4.1
TO ChECk ThE INTERNAL bATTERY’S ChARgE STATUS, PRESS
ThE bATTERY STATUS bUTTON ON ThE FRONT OF ThE INSTANT
POwER™.
The LED
lights will indicate the charge level as follows:
A red LED • indicates a 50% or less charge and you should immedi-
ately recharge the Instant Power™.
A yellow LED
• indicates a 50 to 75% charge. The Instant Power™
may be used but should be recharged as soon as possible.
A green LED
• indicates the internal battery is fully charged.
The CHARGING (red) LED • indicates the Instant Power™ is charg-
ing (connected to an AC power source.) At full charge, the CHARGED
(green) LED will light.
Charging the Internal Battery using the Included Wall Charger. 4.2
NOTE: The ON/OFF switch should be in the OFF position to recharge the
internal battery.
To charge, plug the included wall charger into the charger plug on the 1.
front of the Instant Power™.
Plug the wall charger into a 120V electrical wall outlet.
2.
The CHARGING (red) LED 3. will light indicating charging.
The CHARGED (green) LED 4. will light when the battery has
reached full charge. This could take up to 72 hours due to the age and
condition of the battery. The charger will automatically go into maintain
mode and maintain the battery at full charge without damaging it.
Charge the Instant Power™ as soon as possible after use.
5.
You may also charge the internal battery while driving, using the male-to-
male charger cable (p/n 38-99-001564 – not included). Insert one end of
the accessory cable into the 12V DC power outlet and the other end into
the vehicle’s accessory outlet (lighter socket). Completely disconnect the
charger cable when the engine is not running.
The CHARGING (red) LED and the ChARgED
(green) LED do not operate during this method of charging. Using
this method to charge the battery overrides the maintain mode and the
battery can be overcharged. Monitor the progress of the battery and when
it reaches a full (100%) charge, disconnect the charger. Do not leave the
battery unattended or it could explode causing property damage or
personal injury.