4. Maintenance
4.1 Daily Maintenance
The working surface of the heating plate and the base plate have to be clean. The heating plate can be cleaned with a clean, dry cloth.
Avoid contact with the heating plate – risk of burns. The silicon gum can be cleaned with a soft cloth. You can use mild household
detergent. Avoid scrub sponges, solvents or fuel.
4.2 Monthly Maintenance
Before beginning maintenance work
control if the press is turned off and cold. Disconnect the press from electricity.
Some movable
parts need to be greased. Greasing is needed after
every 200 hours of usage
. You can take normal car grease which is
heat resistant
up to 160°C
.
There are 4 points on the heat press, which have to be greased after 200 hours of usage.
While greasing you have to move the pressure lever up and down slowly.
1.
Down, on the connection part
(photo 1).
2.
On the pressure lever
(photo 2).
3.
On the pressure lever
(photo 3).
4.
Up, on the connection part
(photo 4).
Version 11.01 8 / 13
