27
Setting the handle support and depth gauge.
1.
Turn the handle clockwise so that the handle support (figure 3) can slide on the front of the tool, as
illustrated in figure 3. Set the desired position.
2.
Set the depth gauge (Item 8 - figure 1) in the mounting hole as illustrated in figure 4. Set the desired
drilling depth, tighten the handle support turning the handle clockwise.
FIGURE 2
FIGURE 3
FIGURE 4
Before any adjustment, check if the tool is unplugged from the power grid.
ATTENTION
Never overload your electric tool. It may lock and cause a sudden twist. Hold the
equipment firmly with the two hands to control twist action and avoid damage to
equipment and injury.
ATTENTION
