Schulthess proLine D200, Инструкция по установке

Страница: 36 / 44

EN
36
Installing the appliance
Notice
Do not install the dryer in an enclosed area or in any
area without fresh air circulation .
The dryer works in accordance with the exhaust-air
principle . The moist warm air generated during the
drying of the laundry exits through exhaust air open-
ings .
►
Route the exhaust air via an exhaust duct to a venti-
lation shaft or into the atmosphere (see
Installing
the exhaust duct
)
If the supply of fresh cooling air is inadequate, the dry-
er will suck in again the warm and humid exhaust air .
This lengthens the time taken for drying thus increas-
ing the energy consumption .
►
Install the dryer in a well ventilated area to ensure
that no gases from appliances that burn other fuels
(including open fire) flow back into the room while the
dryer is operating .
During the drying process take care to ensure that
the room is well ventilated (open windows or the door,
unclosable ventilation openings in the walls or doors) .
If the dryer is operated without being connected to
an exhaust air duct, walls could be permanently dam-
aged by the moisture in the air .
►
Do not cover the exhaust air opening (make sure
there is approx . 1 m free space to the exhaust air
opening) .
Removing from the pallet
The machine is delivered on a pallet which can be
transported by fork lift trucks .
►
Lift the machine at the side with a crowbar and slide
pipes underneath .
►
Then roll the machine from the pallet .
Transporting the appliance to the installation
site
A forklift truck can be driven under the dryer to
transport it to the installation site . It is very easy to
bring it through doors with a width of 80 cm .
Important
It is absolutely vital that the cover under the filter
drawer is removed before transportation to prevent
damage to the appliance .
Preparing the dryer for transport
►
Pull out the filter drawer as far as it can go .
►
Lift the drawer slightly and remove it .
5 x
►
Undo the five screws on the front cover .
►
Remove the cover .
The appliance can now be moved .