Cash Card
Inserting the Cash Card
Insert the Cash Card with the
p
symbol facing
upwards. In the display will appear in succession the
amount stored on the Cash Card, the amount on
account which will be deducted, as well as the new
Cash Card balance. Any remaining credit balance sto-
red in the appliance will be set off.
Removing the Cash Card
Selecting and starting the drying programme
u
Select the drying programme
u
Select the additional functions
u
Start the programme
Displays during the programme sequence
During the drying programme, the remaining time and
the remaining credit balance are displayed alternately.
Programme end
When the drying programme is completed, the remai-
ning amount is stored in the appliance under the appro-
priate Cash Card. This remaining credit balance will be
set off
at the next drying cycle. The programme end is dis -
played by the display value 00:00h as well as the flas-
hing control lamp «Open door».
Re-crediting
Re-crediting of the remaining credit balance is best
made at the end of a washing day.
u
Insert the Cash Card. The amount stored on the
Cash Card will appear in the digital display.
u
Re-credit by pressing the fast run button. In the digi-
tal display will appear in sequence the display the
remaining credit balance which will be credited, as well
as the new Cash Card balance.
u
Remove the Cash Card.
Re-crediting can always be made only to that Cash
Card from which the amount was originally deducted.
Remaining value transfer
If there is not an adequately high remaining amount
available on a Cash Card to pay for the booking on
account, this will be displayed by the whistle signal and
by the flashing display with the message saldo to small.
By inserting a second Cash Card, the difference can be
pai d.
Problems
Repairs, alterations or intervention on electronic equip -
ment should only be carried out by qualified specialists.
Inexpert repairs can cause considerable damage and
risk to the user.
Only original spare parts should be used for repairs.
Error messages on the display
If the following error messages are displayed, the pro-
gramme can be restarted by pressing the start button
once the error has been rectified.
«CHILD LOCK ACTIVE»
u
Hold the start button down and press the fast forward
button (see chapter «Basic settings»).
«PLEASE CLOSE DOOR»
u
Push door closed until lock engages.
«COND. WATER FULL»
u
Condensate water pump is not running.
Check if the water discharge hose is bent or the water
discharge provided by the customer is clogged.
«CHECK HEATING LEVEL»
u
A signal tone will arise and the programme will conti-
nue running.
The error message «Check heating level» will occur in
the display and will be displayed until the end of the
pro gram me. Please press the start button once and
then the «Fast forward» button several times until the
message «Pro gram me end» is displayed.
u
Check whether all the temperature switches are swit -
ched on. Push with your finger once around all 3 round
rubber seals (see diagram). If the problem is not fixed
after doing this once, inform customer services.
35
