Schulte RDX-117, Руководство оператора

Страница: 76 / 94

OPERATION
RDX-117 06/20 Operation Section 4-34
© 2020 Alamo Group Inc.
O
PE
R
AT
IO
N
13. SNOW BLOWER STORAGE
Properly preparing and storing the snow blower at the end of the season is critical to maintaining its
appearance and to help ensure years of dependable service. The following are suggested storage procedures:
1. Thoroughly clean all debris off the implement to
prevent damage from rotting grass and
standing water.
2. Lubricate all implements points and fill gearbox
oil levels (applies to 3-point only) as detailed in
the maintenance section.
3. Tighten all bolts and pins to the recommended
torque.
4. Check the implement for worn and damaged
parts. Perform repairs and make replacements
immediately so that the implement will be ready
for use at the start of the next season.
5. Store the implement in a clean, dry place with
the implement resting securely on blocks or at
ground level.
6. Keep the driveline’s yokes or hydraulic hoses
from sitting in water, dirt and other
contaminants.
7. Use spray touch-up enamel where necessary
to prevent rust and maintain the appearance of
the implement.
NOTE: If equipped with the truck-loading chute, ensure the chute is rotated to the side. If the chute is facing
forward, the blower may tip over.
Never allow children to play on or around Tractor or Implement. Children can slip or fall off
the Equipment and be injured or killed. Inadvertent contact with controls can cause the
Implement to shift or fall crushing themselves or others.
(SG-25)
Always maintain the safety signs in good readable condition. If the safety signs are missing,
damaged, or unreadable, obtain and install replacement safety signs immediately.
(SG-5)