Schulte GX-150 Скачать руководство пользователя страница 20

Страница: 20 / 164

SAFETY

GX-150 03/21

Safety Section 1-10

SAFETY

MOWER BLADE CONTACT HAZARDS

KEEP AWAY FROM ROTATING BLADES TO AVOID DEATH OR SERIOUS INJURY FROM

BLADE CONTACT:

•

STAY AWAY

and

KEEP HANDS, FEET

and

BODY AWAY

from rotating blades, drivelines and parts until all moving

elements have stopped.

•

DO NOT

put hands or feet under mower decks

•

STOP

rotating

BLADES

disengage PTO and wait for blade to stop rotating before raising mower deck or wings

•

STOP LOOK

and

LISTEN

before approaching the mower to make sure all rotating motion has stopped.

•

IF A MATERIAL BLOCKAGE

occurs in the inlet or discharge areas of the mower,

SHUT DOWN TRACTOR

ENGINE,

disengage the PTO and wait for all rotating motion to stop. Place the tractor in park position, engage the

parking brake and remove the key before leaving the operator’s set. Clear the blockage before proceeding with

mowing. Be sure to keep feet and hands clear of the mower blades. If you raise the mower or mower wing to access

the blockage, engage the wing lock up latch and securely block up the mower before placing any parts of the body

beneath the mower.

PN MB01

Содержание GX-150





































































































































































Результаты поиска

Содержание GX-150

Отзывы:

Похожие инструкции для GX-150

Бренды по названию

Популярные бренды

Schulte GX-150, Руководство оператора

Результаты поиска

Содержание GX-150

Отзывы:

Похожие инструкции для GX-150

Бренды по названию

Популярные бренды