12
3. Settings.
4. Accessories.
3.6 Back height
The backrest can be continuously adjusted in
height. Loosen the turning handles (
A
) and the
hexagon socket screws (
B
) on both sides of the
frame. Then bring the backrest to the requi-
red height and retighten the turning handles
(
A
) and the hexagon socket screws (
B
) on both
sides.
When adjusting the back height, there is a
risk of trapping or crushing of limbs. After
each adjustment, please retighten all screw
connections!
Adjustments may only be undertaken if the
user is not in the therapy chair.
A
B
4.1 Headrest
In the correct position, the headrest serves
as a support surface for the head, so that
the centre of the headrest makes tangenti-
al contact with the head. Make sure that the
upper edge of the headrest is positioned at
the same height as the top of the head. The
headrest can be adjusted in height using a
gauge pattern in 3 cm steps. In order to put
the headrest in the right position, remove the
attached back pad (
C
), loosen the hexagon
socket screws (
D
) on the back of the headrest
and remove the sleeve nuts. Hold the head-
rest in the required position, push the sleeve
nuts back through the holes from the front and
tighten the hexagon socket screws (
D
) from
the back.
After each adjustment, please retighten
all screw connections!
D
C