12
4. Accessories.
4.3 Mounting the bathing cradle onto the transfer sub-frame
Press the grey tabs (
A
) together and put the
legs in an upright position until they enga-
ge audibly. Subsequently bring the standing
legs of the bathing cradle into a completely
flat position (see
Point 3.6
) and hook in the
bathing cradle below the hook (
B
). Press the
bathing cradle down until it engages au-
dibly below the grey hook (
C
). The transfer
sub-frame can be adjusted in height. To do
this, simply press the button (
D
) into the hole
patterns on the standing leg and allow it to
click out again at the required hole pattern
position. Repeat this adjustment on all four
standing legs.
The height may only be adjusted when the pro-
duct is not in use!
4.3.1 Transfers with the transfer sub-frame
Press the grey button (
E
) and turn the bathing
cradle towards you. Pull the transfer sub-fra-
me forwards until the inner frame of the ba-
thtub and lock the brakes of the wheels (
F
)
(see
Point 4.4
). Position the user on the ba-
thing cradle. Loosen the wheel brakes (
F
) and
turn the bathing cradle with the user whilst
you lift his legs into the bathtub by pressing
the grey button (
E
). Push the transfer sub-fra-
me with the user into the bath. Lock the wheel
brakes (
F
) again.
A
B
C
D
F
E
