11
www.schuchmann-reha.de · [email protected]
Step 11: Pull the clamp screw (A) back onto the Bowden cable and
slide it up to the bar (B).
Then tighten the Bowden cable with a collet (C) and then re-tighten the
clamp screw (A) with a 8 mm combination wrench (counter with a 9 mm
combination wrench if necessary).
before tightening the bowden cable, make sure that the adjust-
ment screw (D) is positioned centrally so that a fine adjustment of
the brake can be carried out after tightening.
D
A
B
C
Step 12: Pull the Bowden cable onto the frame and cut the Bowden
cable with a string cutter (E).
Now also slide the supplied end cap (F) onto the end of the Bowden
cable and lightly press it together with a string cutter.
Please carry out these assembly steps on both handle tubes.
E
F
Please feel free to contact us at any time if you have further questions. Our field and office
staff have been designated as your contact persons. Please contact Mr. Torsten Schuchmann
to coordinate the replacement process:
• Tel.: 05405/909-0
• or per eMail: [email protected].
