schroff VME64x, Руководство пользователя

Страница: 5 / 22

VME64x System Subrack 2 U Safety
20836-245
www.schroff.biz 1 R1.0, July 14, 2009
1 Safety
1.1 Intended Application
The VME64x system subrack, described in this manual, is intended as a
platform for a microcomputer system based on the VME64x bus system
(VITA 1.1-1997).
The VME64x system subracks are designed for protection class IP 20 and can
be used only in the resp. environments.
For higher protection requirements, a.e. IP 54/55 you must install the system
subrack in a protective case.
VME64x system subracks are not finished products, so there is no valid
approval for these units. In order to enable stand-alone functionality, additional
elements are required. An operational system is achieved only by way of
appropriate VME64x boards.
The completion and final testing of the units have been carried out, or at least
supervised, by qualified technicians. These instructions are directed exclusively
to these qualified technicians i.e.engineers, trained and qualified electricians
etc.
Make sure that:
• the assembled unit complies with the safety regulations currently applicable
in the country it is going to be used.
• the overall unit complies with all other regulations and specifications at the
place and country of use, e.g. interference limits, approval by the telecom-
munications authorities.