EasyLED Spotlight Plus - Operating Instructions
PI_69
7/10
2.3 Start-up procedure
You turn the EasyLED Spotlight Plus System on/off by pressing the
switch (3).
The blue indicator light (2) will be on when the instrument is switched
on.
Please disconnect power by pulling out the power plug!
2.4 Light intensity setting
The brightness can be adjusted continuously by turning the
light intensity setting knob (7).
The scale is divided into 6 brightness levels ranging from 0
to 5.
The greatest light intensity is reached when the knob is
turned all the way to position 5.
Please note that when the brightness control is set to 0,
there is no more intensity as all spotlights are off. However,
the instrument itself is not switched off in this case.
To turn the EasyLED Spotlight Plus System off, press the
On/Off switch (3) once.
2.5 Operating mode selection
(EasyLED Double Spotlight Plus System only)
You can successively select the following operating modes by pressing the switch (3) repeatedly:
LED head 1 ON, LED head 2 ON, both LED heads ON, both LED heads OFF, etc.
3. Maintenance
Your EasyLED Spotlight Plus System is maintenance free.
Disinfecting the light source during medical applications is to be avoided.
To clean the outside of the instrument, disconnect the instrument from the mains supply and use a
soft dry cloth or commercially available plastic cleaning cloths. However, never use combustible or
flammable liquids for cleaning.
