쮿
Electrical commissioning for the solar power modules may only be carried out by a qualified
PV installer.
쮿
When connecting a lightening protection system to the solar power modules, observe and
adhere to the national regulations.
쮿
Treat the solar power modules like glass products. They are not suitable to walk on.
쮿
Incorrect installation or commissioning may lead to damages of equipment and place
people at risk.
쮿
Due to serial connection of the solar power modules (in addition to the module voltage),
voltage in excess of the protective low voltage of 120 VDC may be created.
쮿
Before starting work on the solar power modules, switch them off with a disconnection
switch. Working with conductors which conduct direct current can cause electric arcs.
쮿
The maximum permissible system voltage for the solar power modules must not
exceed low ambient temperatures (see data sheet and module rating plate).
쮿
For safety reasons, do not open the connector box.
쮿
Do not drop anything on the solar power modules.
쮿
Protect the solar power modules at the front and the back against scratching and
other damages.
쮿
Protect the module cables against mechanical stress during transport and installation.
쮿
Before installing, check the connector box, cables and socket connectors for damages.
쮿
Protect plug contacts against soiling.
쮿
Do not make any plug connections using soiled plug contacts.
쮿
Never disconnect or connect the socket connections whilst under electrical load!
쮿
Never install damaged solar power modules.
쮿
Cables should not be left in such a manner that they would cause damage or injury
to people.
쮿
The solar power modules and, in particular the socket connectors plus tools, must be
dry during installation.
쮿
Do not store the solar power modules unsecured.
14
E N
Содержание ASE-260-DG-FT
Страница 83: ...84 GR ...