Schonstedt Rex Lite, Руководство пользователя

Страница: 20 / 29

17
Visual Indicator
The information display areas for the transmitter are easy to understand. All visual indicators for
the transmitter are on the LCD display, which has five general areas to display information to
the user: a Battery Indicator, an Output Power Indicator, a Frequency Indicator, a Mode
Indicator, and an Alphanumeric Display.
•
MODE INDICATOR – This area consists of arrow indicators on the bottom of the screen,
which point to an icon on the label that indicates whether the transmitter is in conductive,
clamp, or inductive mode.
•
ALPHANUMERIC DISPLAY - In conductive mode, when the transmitter is delivering
current to the load, the current is displayed as a numeric value, followed by the “ mA ” units
indicator (milliampere = 1/1000 ampere). The Alphanumeric Display is also used for error
messages and to complement the information provided by the Mode Indicator with easy to
understand messages, such as “Ind”, to indicate the transmitter is operating in the Inductive
mode.
•
BATTERY INDICATOR - The battery symbol indicates the transmitter's battery
status. When all three segments inside the battery symbol are present, the
battery is fully charged. When only the two bottom segments are present, the
battery has a medium charge. When only the bottom segment is present, the
battery has a low charge and needs replaced. If there are no segments present,
the battery is extremely low and you should replace it immediately.
•
OUTPUT POWER INDICATOR - The "
Ⓐ
” indicates that the transmitter is operating in
automatic power mode. In this mode, the t r a n s m i t t e r adjusts its output power to match
load conditions. T h e r e i s n o bar graph is in this mode.
o
If the "
Ⓐ
" is not visible, the transmitter is operating in the
manual output power mode. The bar graph indicates the output
power level as explained in the Controls/OUTPUT POWER section
of this manual.
•
FREQUENCY INDICATOR – The upper left of the LCD consists of three icons: "512 Hz”,
“33 kHz", and "82 kHz". These icons indicate the operating frequency.
NOTE: 82 kHz models will only show 512 Hz and 82 kHz, and 33 kHz models will only
show 512 Hz and 33 kHz.