SCHOLTES SH06CRTAB, Руководство по эксплуатации

Страница: 7 / 16

7
GB
Start-up and use
!
The glue applied on the gaskets leaves traces of
grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.
! A few seconds after the hob is connected to the
electricity supply, a buzzer will sound. The hob may
now be switched on.
! If the
-----
or
+ +
+ + +
button is pressed for an extended
period of time, the display scrolls quickly though the
power levels and timer minutes.
Switching on the hob
To switch the hob on, press and hold the button
for approximately one second.
Switching on the cooking zones
To begin using a cooking zone, set the desired
power level using the
-
and
+
.
• Press and hold the
+
button for approximately 2
seconds: the cooking zone will immediately begin
operating at its maximum power level (16).
• Press and hold the
-
button for approximately 2
seconds: the cooking zone will operate at power
level 2 (slow cooking function).
Power function*
The power function for the cooking zones may be
used to shorten heating-up times. Activate and set
the power level for the desired cooking zone as
described in the previous paragraph. Press the
power button
p
ower
p
ower
.The display, which indicates the
power level, will alternately show the letter "P" and
the power level set previously until the desired
power level has been reached. Once this level has
been reached, the display will revert to showing the
set power level. To deactivate this function, press
the
p
ower
p
ower
button again or select a different power level
between 0 and 16 using the power level selector
buttons.
Switching off the cooking zones
To switch off a cooking zone:
• Press the
-
button: the power of the cooking zone
will progressively decrease until it is switched off.
• Alternatively, the
-
and
+
buttons may be
pressed simultaneously: this immediately returns
the power setting to 0 and the cooking zone
switches off.
Programming the cooking duration
!
If the and buttons are pressed for an
extended period of time, the timer scrolls quickly
through the minute values in the corresponding
direction.
! All the cooking zones may be programmed
simultaneously, for a duration between 1 and 99
minutes.
1. Select the cooking zone using the corresponding
selector button.
2. Adjust the temperature.
3. Press the programming button.
4. Set the cooking duration using the and
buttons.
5. Confirm by pressing the button.
The timer begins counting down immediately. A
buzzer sounds for approximately 1 minute and the
cooking zone switches off when the set programme
has finished.
Repeat the above procedure for each hotplate you
wish to programme.
Using multiple programmes and the display
If one or more hotplates are programmed, the
display will show the data for the hotplate with the
least time remaining, and the light corresponding to
the position of the hotplate will flash. The lights
corresponding to the other hotplates programmed
will be switched on.
To display the time remaining for the other
programmed hotplates, press the button
repeatedly. The times remaining for each hotplate
will be shown in a clockwise order, beginning with
the front left hotplate.
*
Only available in certain models.