Schmidlin Schmidlin JET, Инструкция по эксплуатации

Страница: 44 / 52

04 English
44
Disinfection of the JET whirl system
The JET whirl system should be disinfected regularly (especially before using
for the first time and if it has not be used for a longer period of time).
Pay attention to the instructions for use and dosage on the bottle. Add the
disinfectant to a tub filling of at least 5 cm above the nozzles.
The disinfectant recommended by Schmidlin can be used for regular disin-
fection. This is specially matched to the materials used for the Schmidlin whirl
components and is available from specialist dealers or Schmidlin directly.
If bath additives are used, disinfect the tub with fresh water (filling level 5 cm
above the nozzles).
Heater (optional)
The optional adjustable heater for the JET whirl system
is a water flow heater.
The temperature is measured by a sensor in the bathtub
and compared to the set temperature. The heater will be
activated if the set temperature is higher. If the heater is
activated, this is indicated in the status display (red LED
to the top right above the function key). The heater can
only be activated when the JET whirl system is in opera-
tion.
The currently measured temperature (actual tempera-
ture) is always shown by default.