Schmalz SCTMb, Руководство по эксплуатации, Страница: 24 / 30

Maintenance
24 / 30 EN-US · 30.30.01.02106 · 00 · 07/19
11 Maintenance
11.1 Safety
Maintenance work may only be carried out by qualified personnel.
WARNING
Risk of injury due to incorrect maintenance or troubleshooting
4
Check the proper functioning of the product, especially the safety features, after every
maintenance or troubleshooting operation.
CAUTION
Damage due to flying parts
Risk of injury or damage to property!
4
Wear eye protection
4
Before performing maintenance, make sure that the vacuum and compressed air sys-
tem is at atmospheric pressure.
NOTE
Improper maintenance
Damage to the mini compact terminal and the ejector discs!
4
Switch off the supply voltage before performing any maintenance.
4 Secure it so that it cannot be switched back on.
4
Operate the terminal only with a silencer or with the collective exhaust air connected.
11.2 Replacing the Silencer
Heavy infiltration of dust, oil, etc. may contaminate the silencer and reduce the suction capacity. Cleaning
the silencer is not recommended due to the capillary effect of the porous material.
If the suction capacity decreases, replace the silencer:
ü
Deactivate the ejector and depressurize the pneumatic systems.
1. Place a small flat screwdriver on the ejector as
shown and loosen the clamp.