Fundamental Safety Instructions
10 / 96
EN
· 30.30.01.02851 · 01 · 03/22
2.6
Technical Condition
The safety and functionality will be impaired if the product is operated in a defective state. Schmalz assumes no
liability for consequences of modifications over which it has no control.
1.
The product must only be operated when in perfect technical working order – i.e., in its original condition.
2.
Follow the maintenance schedule.
3.
Only use original spare parts.
4.
If the operating behavior should change, check the product for faults. Rectify faults immediately.
5.
Unauthorized conversion or modification of the product is prohibited.
6.
Safety features must not be disabled under any circumstances.
2.7
Responsibility of the Operating Company
The operating company is also responsible for third parties in the working area of the area gripper. The operating
company must ensure that they have the appropriate qualifications and skills. Operation of the product by
unauthorized or untrained persons is strictly prohibited. You must never stand in the working area of the product.
1.
Ensure that the area gripper cannot be used during maintenance or maintenance work.
2.
Clearly define the responsibilities for the various activities performed with the system.
3.
Ensure that these responsibilities are adhered to.
4.
When handling unfamiliar loads, carry out tests where necessary to ensure safe operation:
The load is sufficiently rigid that it cannot be damaged during handling.
The load has sufficient dimensions, is sufficiently airtight and can be lifted safely.
2.8
Country-Specific Regulations for the Operating Company
1.
Observe the country-specific regulations regarding accident prevention, safety testing and environmental
protection.
2.
Only use the area gripper once you have verified that the system employed complies with the country-specific
rules and safety regulations.
