10
GB
B
Verify that a connection concept has been created.
B
Verify that all cables are disconnected from power.
- Verify that the correct assignment of the switching channels for the
timer unit has been considered.
1. Strip the cables as shown.
Permissible cable type to thermal actuators:
H03 VV-H2-F 2 x 0.75 mm²
5.2 Electrical connection
DANGER
ELECTRIC SHOCK
• Verify that the degree of protection against electric shock (protection class, double insulation) is not reduced by the type of electrical installation.
Failure to follow these instructions will result in death or serious injury.
DANGER
ELECTRIC SHOCK CAUSED BY LIVE PARTS
• Disconnect the mains voltage supply before performing the work and ensure that it cannot be switched on.
• Verify that no hazards can be caused by electrically conductive objects or media.
Failure to follow these instructions will result in death or serious injury.
