Schletter PROLINE ROOF HOOK, Руководство по установке

Страница: 3 / 10

PROLINE ROOF HOOKS | V2 | INSTALLATION GUIDE | 202102 3
SCHLETTER SOLAR GMBH | SUBJECT TO CHANGES
PROLINE ROOF HOOKS INSTALLATION GUIDE
TOOLS NEEDED
n
Screwdriver with bit insert
n
Bit T40
n
Angle grinder with diamond wheel
FURTHER REQUIRED DOCUMENTATION
n
Roof hook installation - General information
TIGHTENING TORQUE
n
Screw connections M8: 15 Nm
Exception: Wood screws: with depth stop
SAFETY INSTRUCTIONS
Planning, installation and commissioning of the solar power system must only be performed by
qualified technical personnel. Improper execution can result in damage to the system and
premises and endanger persons.
Falling hazard! Working on the roof as well as ascending and descending poses a risk of falling.
It is vital to observe accident prevention regulations and use appropriate fall protection
equipment.
Injury hazard! Falling objects pose a risk of injury to people. Prior to installation, set up
barriers in the hazard area to warn people nearby.
RAPIDA45 INSTALLATION INSTRUCTIONS
n
Ideally, the tile gaps (tiles pushed upwards) should be used with the roof battens/counter
battens for climbing
n
Climbing on rails should be avoided
n
The frame and especially the rails must not be used as climbing aids on roof pitches > 30°.
n
When installing, mount the roof hooks completely, mount the top row of rails and lay the
modules immediately, then the next row from top to bottom.
n
A support on the upper arm of the roof hook provides the necessary stability (support on the
back of the upper part of the roof hook).
n
PV mounting systems are not suitable for use as climbing aids or fall protection systems